Skip to content

LumenPnP Strip Feeders

Prepare strip-feeder-hardware-set

  • Prepare Bagging Station

  • Add the following hardware to a 1.5" x 1.5" plastic bag

    • 2x M3-wing-nut

      Visually inspect the threads of wing-nut prior to bagging

    • 2x M3x10-ULPCS

  • Fill up the yellow needs QC bin with the hardware bags you make

  • Weigh each hardware bag before transferring to the green QC Pass bin

    • Confirm each hardware bag weights 4.9g +/- 0.5g

    - Transfer the QC-checked hardware bags to the strip-feeder-hardware-set bin found at the Strip Feeder workstation

Prepare ##mm-strip-feeder-kit

  • This section covers the following versions of the strip-feeder-kit:
    • 8mm-strip-feeder-kit
    • 12mm-strip-feeder-kit
    • 16mm-strip-feeder-kit
    • 24mm-strip-feeder-kit
    • 32mm-strip-feeder-kit

Adhere Sticker

  • Adhere the sticker onto the given strip feeder, being sure to properly center it

Check Strip-Feeder Flatness

  • Inspect the strip-feeder print for warping by placing it on a granite surface plate

    Continue onward if strip-feeder sits flush against plate

    Scrap the strip-feeder if it fails to sit flat against plate

Create ##mm-strip-feeder-kit

  • Insert 1x ##mm-strip-feeder into 3x6-bag
  • Insert 1x hardware-bag into 3x6-bag

  • Seal bag closed

  • Place completed ##mm-strip-feeder-kit into Yellow Needs QC Bin for peer review

Prepare adj-strip-feeder-kit

Check adj-strip-feeder flatness

  • Inspect both sides of the adj-strip-feeder print for warping by placing it on a granite surface plate

    Continue onward if the strip-feeder sits flush against plate

    Scrap the strip feeder print if it fails to sit flat against the plate

Adhere Sticker to adj-strip-feeder-left

  • Use adj-strip-feeder-sticker-jig to install sticker onto adj-strip-feeder-left

Create adj-strip-feeder-kit

  • Insert 1x adj-strip-feeder-left w/sticker into 3x6-bag
  • Insert 1x adj-strip-feeder-right into 3x6-bag
  • Insert 2x hardware-bag into 3x6-bag

  • Seal bag closed

  • Place completed adj-strip-feeder-kit into Yellow Needs QC Bin for peer review