Skip to content

LumenPnP Control Box DIY Part

Purpose

The purpose of this work instructions is to document the assembly process for the LumenPnP Control Box DIY Part.

Instructions

  • Build a Control Box until the Gundam Testing step on this page.

  • Identify the CHIMERA jumper on the motherboard and solder the two pads together as shown.

  • Perform the Gundam testing as normal.

  • Put the control-box-asm build number sticker in the recess in the back of the control box.

    alt text

  • Stick the label onto the top with a couple pieces of double sided tape

The completed LumenPnP Control Box DIY Part is now ready for packout!